background image

8

Some of the following symbols may be used on this product. Please study them and learn their meaning. 

Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOLS

SYMBOL

NAME

DESIGNATION/EXPLANATION

V

Volts

Voltage

A

Amperes

Current

Hz

Hertz

Frequency (cycles per second)

W

Watts

Power

min

Minutes

Time

Alternating Current

Type of current

Direct Current

Type or a characteristic of current

Class II Construction

Double-insulated construction

Safety Alert Symbol

Indicates a potential personal injury hazard.

 

Read The Operator’s Manual

 

To reduce the risk of injury user must read and 

understand operator’s manual before using this product.

Wet Conditions Alert

Do not expose to rain or use in damp locations

 

Eye and Hearing Protection

Always wear eye protection with side shields marked
to comply with ANSI Z87.1, along with hearing protection.

Long Hair

Failure to keep long hair away from the air inlet 

could result in personal injury.

Loose Clothing

Failure to keep loose clothing from being drawn 

 

 

 

into air intake could result in personal injury.

                     Keep Bystanders Away               Keep all bystanders at least 50 ft. away.

Gloves

Wear non-slip, heavy-duty protective gloves when 

handling the grass trimmer.

Safety Footwear

Wear non-slip safety footwear when using this equipment.

Electric Shock

Failure to use in dry conditions and to observe safe 

practices can result in electric shock.

Summary of Contents for GT1238























Reviews: