background image

GRASS TRIMMERS

STOCK No.56477

PART No.GT3525T

56478

GT4729DA

11/2000

• INSTRUCTIONS •

IMPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE

SAFE AND EFFECTIVE USE OF THIS TOOL.

SPECIFICATION

Whilst every effort has been made to ensure that the information given in this manual is correct at
the time of going to print, the Draper Tools policy of continuous improvement determines the right
to change specification without notice.

STOCK No. . . . . . . . . . . . . . . . . . . . . . . . . . . 56477 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56478
PART No. . . . . . . . . . . . . . . . . . . . . . . . . . . GT3525T . . . . . . . . . . . . . . . . . . . . . . . . GT4729DA
VOLTAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V
POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475W
CUTTING WIDTH . . . . . . . . . . . . . . . . . . . . 250mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . 290mm
LINE FEED SYSTEM . . . . . . . . . . . . . . . . . "Tap n’ Go" . . . . . . . . . . . . . . . . . . . Fully Automatic
LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single 6M. . . . . . . . . . . . . . . . . . . . . . Double 2x5M
SUPPORT HANDLE . . . . . . . . . . . . . . . . . Adjustable. . . . . . . . . . . . . . . . . . . . . . . . Adjustable
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2kg.
SOUND POWER LEVEL . . . . . . . . . . . . . . . . 91dbA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94dbA
SOUND PRESSURE LEVEL . . . . . . . . . . . . . . 84dbA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84dbA
VIBRATION LEVEL . . . . . . . . . . . . . . . . . . . 2.8m/s

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8m/s

2

Summary of Contents for GT2222











Reviews: