LawnMaster CLPS4008, Operator'S Manual, Page: 27 / 37

27
CARE AND MAINTENANCE
● Keep the product clean. Remove debris from it after each use and before storage.
● Regular and proper cleaning will help ensure safe use and prolong the life of he product.
●
Inspect the product before each use for worn and damaged parts. Do not perate it if you find
broken and worn parts.
General Cleaning
● Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
● In particular clean the air vents after every use with a cloth and brush.
● Remove stubborn dirt with high pressure air (max. 3 bar).
● Check for any damage and wear. Repair damages in accordance with this instruction manual.
NOTE:
Do not use chemical, alkaline, abrasive or other aggressive etergents or isinfectants to
clean this product as they might be harmful to its surfaces.
Sprocket Wheel
NOTE:
It is not necessary to remove the chain to lubricate the sprocket. Lubrication can be
done on the job.
● Clean the sprocket wheel.
● Using a disposable lube gun, insert the needle nose into the lubrication hole and inject grease
until it appears at the outside edge of the sprocket (Fig. 39).
● Rotate the chain by hand. Repeat the lubrication procedure until the entire sprocket has
been greased.
WARNING!
Always switch the product off, remove the battery pack and let the product cool down before
performing inspection, maintenance and cleaning work!
WARNING!
Only perform repairs and maintenance work according to hese instructions! All further works must
be performed by a qualified specialist!
General Care
21b
21c
Fig. 39