LawnMaster CLMFR6020A 0802, Operator'S Manual, Page: 21 / 40

21
NOTE: Make sure that the battery pack firmly snaps into place and is secured to the mower before starting
operation.
To remove battery pack:
1. Stop the lawn mower. Lift the battery compartment cover and remove the safety key.
2. Press the release button on the battery pack, grasp the battery pack firmly and pull out of the battery
compartment cover (Fig. 13).
3. Close the battery compartment cover.
ASSEMBLY
Fig. 13
IPOWER MOWER MODE INDICATOR (20a) (Fig. 14)
1. By default, the motor power is set to “AUTO” and will automatically adjust to your lawn.
2. Push the press button repeatedly to cycle through the different motor power levels.
• Set the motor power to “1”, if your lawn needs only light mowing.
• Set it to “2”, if you are going to mow taller and thicker grass.
• Set it to “3” to utilize the maximum motor power for mowing the most stubborn grass.
IPOWER BATTERY METER INDICATOR (20b) (Fig. 14)
1. Push the press button to check on the battery status.
2. The number of lights lit will depend on the condition of the battery.
3. 4 lights indicate a fully charged battery, and 1 light indicates that the battery needs to be charged.
A flashing LED on the battery indicates that the voltage is too low.
WARNING
Fig. 14
Ⅰ
Ⅱ
20a 20b
iPower Control Panel