LawnMaster CLMFR6020A 0802, Operator'S Manual, Page: 17 / 40

17
ASSEMBLY
Holders Rods
INSTALLING AND REMOVING THE GRASS COLLECTION BAG
NOTE:
When using the grass collection bag, do not install the mulching plug. The mulching plug MUST be
removed prior to installing grass collection bag.
Installing the grass collection bag:
1. Lift the rear safety flap and hold it in the position (Fig. 6).
2. Lift the grass collection bag by its handle and hook the rods of collection bag on the mower holder
under rear safety flap (Fig. 6).
3. Release the rear safety flap.
4. Make sure both rods are firmly seated on the holder and rear safety flap rests firmly against the top
of the grass collection bag.
Fig. 6
Removing the grass collection bag:
1. Lift the rear safety flap and hold it in position.
2. Lift the grass collection bag by its handle, and unhook the grass collection bag from the mower.
3. Release the rear safety flap.
NOTE: Under normal usage, bag material is subject to wear. To reduce the risk of injury, frequently inspect the
bag assembly and replace if there are any signs of wear or deterioration.
Mulching plug must be removed
prior to installing grass collection bag.