LawnMaster CLMF4015K, Operator'S Manual

Page: 16 / 39

16
ASSEMBLY
2. Insert the lower handle into the bolts on the lawn mower housing. Let the lower handle adjust to the
desired operating position. There are two possible positions. Fasten the handle by placing the washer over
the support pin, followed by the locking knob and turn the locking knob clockwise to tighten. Do not use
excessive force; this may damage the knobs (Fig. 2).
Fig. 2
Locking Knob
Washer
ASSEMBLING THE UPPER HANDLE
1. Fix the upper handle using the bolts, washers and the locking knobs as shown in Fig 3, and turn
the locking knobs clockwise to tighten (Fig. 3). The handle can be adjusted to 2 different height
positions.
2. Secure the control cable with the cable clips (Fig. 4).
Locking Knob
Control Cable
Washer
Bolt
Cable Clip
ASSEMBLING THE COLLECTION BAG
1. Check the grass collection bag before assembling to make sure there is no damage.
2. Pull the grass collection bag over the metal frame as shown (Fig. 5).
3. Pry open the soft plastic clamping sleeves and insert the metal frame into the sleeves. Ensure all sleeves
are properly clamped on the frame.
4. The completely assembled grass collection bag is as shown as below (Fig. 6).
Fig. 3 Fig. 4
Bolt