A flashing LED on the cutting mode control panel indicates that the current is too high. A flashing
LED on the battery indicates that the voltage is too low. In either case the motor will be shut down
automatically . Do not continue to activate the On/Off switch if the motor has been shut down
automatically. The battery may be damaged.
WARNING
19
ASSEMBLY
iPOWER MOWER MODE INDICATOR (10a)
(See Fig. 16)
Located on upper mower handle
■
By default, the motor power is set to “AUTO” and will automatically
adjust to your lawn.
■
Push the press button repeatedly to cycle through the different
motor power levels.
• Set the motor power to “1”, if your lawn needs only light mowing.
• Set it to “2”, if you are going to mow taller and thicker grass.
• Set it to “3” to utilize the maximum motor power for mowing the
most stubborn grass.
iPOWER BATTERY METER INDICATOR (10b)
(See Fig. 16)
■
Push the press button to check on the battery status.
■
The number of lights lit will depend on the condition of the battery.
■
lights indicate a fully charged battery, 1 light indicates the battery
needs to be charged.
ipower Control Panel (10)
Fig. 16
10a
10b