background image

3

GENERAL SAFETY RULES

WARNING

Read and understand all instructions before using this product.

 Failure to follow all 

•  Do not operate power tools in explosive atmospheres

such as in the presence of flammable 

   liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
•  Do not allow children or untrained individuals to use this unit.
•  Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the 
   risk of electric shock.
•  Do not handle plug or tool with wet hands.
•  Never allow children to operate the equipment. Never allow adults to operate the equipment 
   without proper instruction.
•  Always wear safety glasses with side shields. Everyday glasses have only impact resistant
   lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury. Use
   face mask if operation is dusty.
•  Wear eye protection when operating this product. Secure long hair above shoulder level to
   prevent entanglement in moving parts.
•  Do not expose to rain, store indoors.
•  Keep all parts of your body away from any moving part.
•  Keep hair

loose clothing

fingers and all body parts away from opening and moving parts.

•  Wear heavy long pants, boots, and gloves. Avoid loose garments or jewelry that could get
   caught in moving parts of the machine or its motor.
•  Do not force tool. Use the correct tool for your application. The correct tool will do the job
   better and safer at the rate for which it is designed.
•  Do not operate the equipment while barefoot or when wearing sandals or similar lightweight
   footwear. Wear protective footwear that will protect your feet and improve your footing on
   slippery surfaces.
•  Secure long hair so it is above shoulder level to prevent entanglement in any moving parts.
•  Keep firm footing and balance. Do not overreach. Overreaching can result in loss balance.
•  Do not allow to be used as a toy. Close attention is necessary when used by or near children.
•  Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the
   switch is dangerous and must be repaired.
•  Keep all bystanders, children, and pets at least 50 ft. away.
•  Do not operate this unit when you are tired

ill

 or under the influence of alcohol

drugs

or 

   medication.
•  Do not operate in poor lighting.
•  Do not put any object into openings. Do not use with any opening blocked; keep openings free
   Of dust

lint,hair

and anything that may reduce air flow.

•  Check the work area before each use. Remove all objects such as rocks, broken glass, nails,
   wire, or string which can be thrown or become entangled in the machine. 

Summary of Contents for CLGT4012K





















Reviews: