11
ASSEMBLY
WARNING
This product must be used with all safety guards installed at all times.
Failure to heed this warning could result in serious personal injury.
Fixed Line Trimmer Head
1. Make sure that the safety guard has been attached properly.
2. Rotate the backing flange until its hole is aligned with the
notch in the gear head.
3. Insert the spindle lock rod into the hole to lock the spindle.
4. Screw the trimmer head anticlockwise on the spindle (Fig. 6).
5. Remove the spindle lock rod.
Shoulder Strap
The shoulder strap helps the operator to carry the product.
1. Attach the snap clip to one of the three connection points most suitable to your height (Fig. 7).
2. To remove the shoulder strap from the loop, pull the clasp release bar back and out of the hole.
3. Install and place the shoulder strap as show below (Fig. 8).
Fig. 7
A
20b
20a
Fig. 8
20
1
3
2
4
A - Trimming Head (Cabeza de bordeadora)
B - Backing Flange (Reborde trasero)
C - Spindle Lock Rod(Vara de bloqueo del eje rotor)
A
B
C
Summary of Contents for CLGT4012K
Page 18: ...18 EXPLODED VIEW CLGT4012K EXPLODED VIEW...
Page 20: ...20 NOTES...
