4
A STEELFORT PRODUCT
•
Repair or replace all damaged and or defective
parts immediately.
•
Locate all operating controls and safety labels.
•
Make sure all the safety instructions are in
correct working condition.
•
Keep all safety guards in place and in proper
working order at all times.
•
DO NOT allow any material to block the cooling
slots.
•
DO NOT allow children or untrained people to
operate the unit.
•
Read the instructions carefully. Be familiar
with the controls and the proper use of the
appliance.
•
This product has been designed for use in
cutting grass, and it should never be used for
any other purpose.
•
Never use while people, especially children, or
pets are nearby.
•
The operator or user is responsible for
accidents of hazards occurring to other people
or their property.
•
Always store fuel in a properly marked
container that complies with New Zealand
standards.
•
Do not mix fuel in an enclosed room or near an
open flame, ensure adequate ventilation.
•
Never attempt to make engine adjustments
while the engine is running and strapped to the
operator.
PREPARATION
•
Petrol is highly flammable: Store fuel in con
-
tainers specifically designed for this purpose;
refuel outdoors only and do not smoke while
refueling;add fuel before starting the engine.
Never remove the cap of fuel tank or add petrol
while the engine is running or when the engine
is hot; if petrol is spilled, do not attempt to
start the engine but move the machine away
from the area of spillage and avoid creating
any source of ignition until petrol vapors have
dissipated. Replace all fuel tank and container
caps securely.
•
Replace faulty silencer.
•
Before using, always visually inspect to see that
the tools are not worn or damaged. Replace
worn or damaged elements and bolts in sets to
preserve balance.
•
Never put any items into the ventilation open-
ings. Non-observance may lead to injury, or
damage to the machine.
•
It is necessary reduction in power due to use in
higher temperatures, altitudes and humidity as
below conditions.
Max Working Temperature: 40°C
Max Altitude: 1000 m
Max Humidity: 95%
OPERATION
•
Do not operate the engine in a confined space
where dangerous carbon monoxide fumes can
collect.
•
Keep the machine free of oil, dirt and other
impurities.
•
Always place the appliance on even and stable
surfaces.
•
Never operate the appliance inside buildings or
in an environment without proper ventilation.
•
Do not operate or store the appliance in wet or
humid surroundings.
•
Ensure the sound absorber and air filter work
properly.
•
Do not touch the exhaust system or other parts
that become hot during operation.
•
The engine must not be operated with
excessive rotary speed. The operation of the
engine with excessive rotary speed raises the
risk of injury.
•
Regularly check for leakage or traces of
abrasion in the fuel system, such as porous
pipes, loose or missing clamps and damage to
the tank or tank cap.
•
Work only in daylight or in good artificial light.
•
Never pick up or carry a machine while the
engine is running.
•
Stop the engine whenever you leave the
machine and before refueling.
•
Before checking or adjusting the machine, the
ignition plug and the ignition wire respectively
must be removed to prevent accidental
starting.
•
Do not use the machine when the operator is
tired, ill or under the influence of alcohol or the
drugs.
•
Wear safety goggles and ear protection.
•
Ensure that you maintain a steady foothold.
•
Only use the brush cutter on flat surfaces
where you have a firm footing.
•
Always wear substantial footwear and long
trousers. Do not operate the equipment when
barefoot or wearing open sandals.
