14
A STEELFORT PRODUCT
WARNING
Avoid metal wire or wire encased in plastic in the
cutting head to prevent injuries. To extend the line,
run the motor at full speed and tap the cutting head
on the ground. This will automatically lengthen the
line, with the cord cutter trimming it to the proper
length (Fig. 20).
FIG.20
MAINTENANCE & STORAGE
It is the operator’s responsibility to complete all scheduled maintenance and or servicing in a timely manner.
Always correct any issues before operating the brush cutter. Follow all inspection and
maintenance recommendations that are listed in the manual.
WARNING
Improper maintenance and or failure to correct problems prior to operating the unit may cause the unit to
malfunction and result in property damage and or serious personal injury. Improper maintenance and servicing
may void warranty.
During maintenance operations:
•
Remove the spark plug cap.
•
Wait until the engine is sufficiently cold.
•
Never dispose of oils, fuel or other polluting materials in unauthorized places.
Before performing any maintenance or cleaning work, always turn off the engine.
1.
Do not spray the unit with water. Ingress of water may damage the engine and electrical connection.
2.
Clean the unit with a cloth, hand brush, etc.
MAINTENANCE SCHEDULE
STOPPING THE ENGINE
1.
Release the throttle trigger and let it run idling
for a few minutes.
2.
Switch off the engine by moving the engine
switch to the stop position.
Ensure the cutting attachment has completely
stopped turning before setting down the unit to
prevent potential accidents.
MAINTENANCE
DAILY
MAINTENANCE
WEEKLY
MAINTENANCE
MONTHLY
MAINTENANCE
Clean the outside of the machine.
Make sure the throttle trigger lock and
the throttle function correctly from a
safety point of view.
Check that the engine switch works
correctly.
