background image

9

1.  Prepare the petrol/oil mixture in a 

clean canister intended for use with 
petrol.

2. 

of the oil, then shake the canister. Fill 
in the rest of the petrol and shake the 
canister again.

3. 

mixture into the petrol tank. Wipe 

-

Tests before starting the  

appliance

• 

Verify that the spark plug connector 
is attached properly. A lose connector 
may produce sparks that might ignite 
any fuel-air mixture escaping. 

•  Verify that all switches move freely and 

that the safety devices are operative.

•  Verify that the blade is mounted prop-

erly and that the handles are clean.

•  Verify that there is enough fuel in the 

Starting the motor

  1.  Place the appliance on a solid and 

even surface. Check that the bla-
de is not touching any objects or 
the ground.

 

2.  To start the ignition, move the On/

Off switch (17) to “I”.

 

3.  If starting the engine afresh, turn 

the choke (7) clockwise until it 
snaps in.

 

4.  Press the fuel pump (primer) (9) 

5-10x until fuel starts coming out.

 

5.  Hold the appliance by the front 

anti-vibration handle with your left 
hand and step down on the rear 
handle with your right foot. 

 

6.  Pull the starter cord on the starter 

handle (8) until the engine starts.

 

7.  Press the throttle lock (19) and 

the throttle (18) at the same 
time. The choke (7) will release 
automatically.

Stopping the motor

1.  Let go of the throttle. 
2.  To stop the ignition, move the stop 

switch to “O”.

  For an emergency stop, set the 

On/Off switch.

Operation

  Take heed of noise protection and 

local regulations. Do not trim hedges 
during rest periods.

  •  While trimming mind not to 

touch any objects such as wire 
fences or plant supports since 
this may damage the blade bar.

 

•  In case a solid object obstructs 

the blades, immediately turn off 
the appliance and remove the 
object.

 

•  Avoid too much stress on the 

appliance.

Adjusting the handle

 

The handle turns left and right by 
45° and 90° either side. This al-
lows you to choose the most con-
venient and comfortable position.

•  Push down the handle adjustment 

knob (11) and turn the handle to the 
appropriate position. It will audibly 
snap in. 

Summary of Contents for LK PHT2660B


















Reviews: