10
3350-614 Rev A
7.
Secure the chute with the wing screw (A).
1013
A
8.
Check the clearance between the blade tips and
the baffle and ensure that there is no contact.
Important: The baffle (A) must go behind the front
housing baffle (B) and between the blade and the toe
guard (C) to prevent it from contacting the blade.
1072
A
B
C
9.
Remove the knob (A) and the bolt (B) that secure
the left upper and lower handle sections.
1011
B
A
C
D
10. Hold a hanger clamp (C above) on the outside of
the handle sections and insert a bolt from the inside
of the handle sections through the holes in the hanger
clamp.
11. Position the leg of the bag hanger (D above) into
the hanger clamp groove and secure it with a knob.
12. Repeat steps 9 through 11 for the other side.
13. Close the rear of the
bag by folding the sides
in and pressing the
interlocking rear handle
halves together.
1012
14. Hang the interlocked rear bag handle halves on
the bag hanger.
15. Grasp the front bag handle and slide it over the
flange of the grass chute.
16. Push downward on the front bag handle until it
seats into position.
1010
17. Ensure that the bag is taut on the top cloth area
between the front bag handle and rear bag handles.
Note: Use the lower holes to tighten the bag; use the
upper holes to loosen the bag.
