GB–13
Operation
Starting Engine
Note:
Follow steps in BEFORE STARTING
section.
1.
Open fuel shut off valve (Fig. 16).
m–3887
1
Figure 16
1.
Fuel shut off valve
2.
Move throttle lever to
position (Fig. 17).
10051
Figure 17
3.
Push primer three (3) times (Fig. 18). Wait
about two (2) seconds between each push.
Note:
Do not use
position to restart a
warm engine after a short shutdown.
1728
1
Figure 18
1.
Primer
4.
Hold blade control bail against upper handle
(Fig. 19).
M–2505
1
2
Figure 19
1.
Blade control bail
2.
Starter handle
5.
Pull starter handle (Fig. 19) lightly until
resistance is felt, then pull sharply. Let rope
return to handle slowly.
6.
If the engine fails to start, repeat steps 3
through 5.
Note:
If the engine starts but then begins to
stall, move the throttle lever to the
position until the engine continues to
run, then move the throttle back to the
position.
