above instructions may put the safety of
the equipment at risk.
14) WARNING: The water jet from the high-
pressure nozzle produces a recoil on the
gun. You should therefore hold the gun
and spray lance firmly.
15) WARNING: This appliance has been
designed for use with cleaning agent
supplied or recommended by the
manufacturer. The use of other cleaning
agents or chemicals may adversely affect
the safety of the appliance.
16) WARNING: Do not use the appliance
within the range of persons unless they
wear protective clothing.
17) WARNING: High pressure jets can be
dangerous if subject to misuse. Jets must
not be directed at persons, at animal, live
electrical equipment or the appliance
itself.
18) Do not direct the jet against yourself
or others in order to clean clothes or
footwear.
19)
•
WARNING: High pressure hoses,
fittings and couplings are important
for the safety of the appliance. Use
only hoses, fittings and couplings
recommended by the manufacturer;
preservation of the integrity of these
components, by preventing improper
use, is extremely important.
20) The appliance is equipped with a
calibrated nozzle which determines the
rated performance of the appliance.
Each variation of the nozzle’s section
causes alterations, as for the machine
performance.
> STABILITY
•
WARNING:
The machine must be always kept
on horizontal bases, in a safe and stable way.
> WATER SUPPLY
Water supply collection
Water supply from the water main
· Connect a supply hose (not included) to
the water inlet of the unit and to the water
supply.
· Open the water supply.
WARNING: (symbol) machine not suitable
for connection to the potable water mains.
The cleaner can only be connected to the wa-
ter mains if the water mains is separated by a
backflow preventer. Make sure that the hose
is at least Ø 13mm-1/2 inch and that it is rein-
forced.
•
WARNING: Water that has flown through
backflow preventers is considered to be
nonpotable.
IMPORTANT: Only clean or filtered water
should be used for intake. The delivery of
the water intake tap should be equal to the
double of the maximum pump range.
- Minimum delivery rate: 25 l/min.
- Maximum intake water temperature: 40°C
- Max inlet water pressure: 1Mpa
Place the cleaner as close to the water supply
system as possible.
Water supply from an open container
· Unscrew the coupling part for the water
inlet.
· Screw the suction hose with filter (not
included) onto the water connection of the
unit.
· Hang the filter in the container.
· Vent the unit before operation.
· Unscrew the high-pressure line at the high-
pressure outlet of the unit.
· Switch on the unit and let it run until water
free of bubbles emerges at the high-pressure
outlet.
· Switch off the unit and screw on the high-
pressure hose again.
Failure to comply with the above conditions
causes serious mechanical damage to the
pump and the loss of warranty cover.
EN
14