Lavor THERMIC 5H, Translation Of The Original Instructions, Page: 14 / 90

•
CAUTION: The water jet shall never be pointed to the
machine .
I. GUN SAFETY DEVICE
Whenever you need to stop the machine, it is necessary
to use the safety lock , placed on the gun, in order
to avoid fortuitous openings .
S
S
II. DETERGENT SUCTION
Plunge suction hose with filter into detergent tank .
When you start the machine,
the detergent suction
is automatic when the adjusting head of the lance
is rotate for low pressure operation (anti-clockwise) .
•
CAUTION: make use only of liquid detergent, do
not absolutely use acid or too much alkaline prod-
ucts . We suggest you to make use of our products,
which have been studied for the use with washer
machines .
,
III. USE OF THE LANCE
The adjusting head allow you to select water jet
at low and high pressure . The pressure selection
is carried out by rotating the adjusting head . To
increase the pressure, rotate the adjusting head
clockwise, to reduce the pressure rotate it anti-
clockwise .
IV. APPLIANCES PROVIDED WITH THERMAL VALVE
This device enables the machine’s by-pass operation
through automatic water discharge whenever it reach-
es a temperature of nearly 60°C and cooling working
components .
•
CAUTION : appliances that are not provided with this
disposal must not operate for more than 2 minutes with
released gun . Recycled water raises its temperature re-
markably causing great damages to the pump .
MONTAGE
Study the series of photos shown below (fig .B):
OPERATING INSTRUCTIONS
•
CAUTION! Do not run the engine with a high or
low oil level as this can cause engine damage . If
you have further questions regarding the engine,
please refer to the engine’s operating manual in-
cluded with the unit .
•
CAUTION! The engine is not provide with oil . It is
necessary to fil the carter before starting the en-
gine .
•
CAUTION! Before starting the pump,
check the oil level in the pump .
•
CAUTION! If it is the first time that
you use the machine or if you do not op-
erate the machine for a long period,
it is necessary to connect, for some minutes, the
suction hose, in order to let possible impurities
go out, so that the nozzle gun will not become
clogged .
•
CAUTION! Fill gas tank with unleaded
gasoline . Do not use leaded gasoline .
I. STARTING UP
WATER SUPPLY
14