32
B
A
B
A
Photo 10
Photo 9
A) Closing door of the battery compartment (op-
tional)
B) Squeegee lifting cable
Photo 11
A) Battery compartment with two 12V batteries
B) Closing door of the battery compartment (op-
tional)
Photo 12
Battery connection diagram
6 - INSTALLATION INFORMATIONS
6.1 BATTERY INSTALLATION
The battery compartment is located in the rear part
of the solution tank (Photo 9) and to access it is ne-
cessary to open the locking door (optional - Photo
9 - A); to allow the opening of the door disconnect
the the
squeegee lifting cable (Photo 9 - B);
to open the door, lift it up and turn it down, until
the brackets stand on the floor, as shown in (Photo
10).
Place the batteries on the door plain and make the
connection as described in paragraph 6.1.1; after
the battery connection, push them inside the bat-
tery compartment (Photo 11), close the door and
reconnect the squeegee lifting cable.
6.1.1 BATTERY CONNECTION
Place the general ON/OFF switch ( Photo 4 - H ) in
the OFF position as well as motors switches on the
control panel.
Attach the wiring to the batteries, connecting
the terminals exactly and only to the poles
marked with the same symbol (red wiring "+",
black wiring "-") according to the wiring dia-
gram shown in (Photo 12)
A short circuit of batteries can cause explosions!
Summary of Contents for NEXT EVO
Page 178: ......
