Lavor 0.013.0106, Instruction Manual

Page: 34 / 80

34
GB
Filling the pump housing (fig. A)
After each use the pump housing must be drained.
n
Remove the water hoses present.
n
Remove the screw from the bleeding point (7).
n
Tilt the machine forward and empty the pump
housing.
n
Re­insert the screw and tighten it securely.
@
Never fully close the bleeding point
if you leave the machine in an area
colder than 0 °C.
TECHNICAL DATA
EG-P 3600
Mains voltage V 230
Mains frequency Hz 50
Power input W 1,000
Max. pump capacity l/h 3,600
Max. pumping depth m 8
Max. pumping height m 45
Max. water temperature °C 35
Weight kg 6.3
Level of sound pressure measured according to
ISO 3744:
EG-P 3600
L
pA
(sound pressure) dB(A) < 70
GUARANTEE
This product has been thoroughly checked in
the factory. After purchase date a full 2 year’s
guarantee applies to material and production
defects. A guarantee of 6 months applies to
rechargeable batteries/battery packs and chargers.
Guarantee conditions
If the product shows defects as a result of
material and production defects during the
period of guarantee, we guarantee free repair
on condition that:
­ the product has been used properly and for
the purpose for which it has been intended.
­ repairs are professionally carried out by
a person appointed by the supplier.
­ the proof of purchase will be submitted.
Accessories and parts showing normal wear are
not covered by any guarantee.
If, during the period of guarantee, a defect
emerges that cannot be repaired, free
replacement of the product takes place.
[
ENVIRONMENT
Should your product need replacement after
extended use, do not put it in the domestic waste
but dispose of it in an environmentally safe way.
DECLARATION Of CONfORMITY
%
Lavorwash S.p.A. declares that the machines:
Water pump EG-P 3600
have been designed in compliance with the
following standards:
EN 50366, EN 55014­1, EN 55014­2,
EN 60335­1, EN 60335­2­41, EN 61000­3­2,
EN 61000­3­3
and in accordance with the following directives:
2004/108/EC, 2006/95/EC
Pegognaga, 02­2010
Giancarlo Lanfredi
Director
Lavorwash S.p.A., via J. F. Kennedy, 12 Italy 46020 Pegognaga (MN)
IMPORTANT (fOR UK ONLY)
If the moulded 3 pin plug attached to this unit is
damaged and needs replacing, it is important
that it is correctly destroyed and replaced by an
approved BS 1363/5A fused plug and that the
following wiring instructions are followed.
The wires in this mains lead are coloured in
accordance with the following code:
blue neutral
brown live
green and yellow earth