Superabrasive
Owner’s Manual Original Language – Lavina
®
V32-X-400-E
06/2019
9
4. UNPACKING, HANDLING, TRANSPORTATION AND STORAGE
When unpacking the machine, please check that the following accessories are included:
The hose end fitting
Wand
Floor nozzle
Main vacuum hose with Cam Lock to connect to the machine
Accessory vacuum hose with Cam Lock to connect to the wand
If any of the above-mentioned parts are missing, please contact your local distributor or our sales representative.
Protect the environment: Please dispose of packaging materials and used machine components in an environmentally
safe way according to local disposal regulations.
Attention
When handling and transporting the machine , never use the handles or other machine parts to lift the machine. Use
always a skid or pallet for transportation, and never transport an unprotected machine in the rain or snow. Always store
and transport the machine in an upright position. The machine should also always be stored in a dry, frost-proof
environment
5. OPERATION OF VACUUM
STARTING THE MACHINE:
Before starting the machine, check the service table for daily maintenance
.
Make sure
that the flexible vacuum hose is securely attached to the vacuum pipe union and vacuum cleaner inlet. Inspect the
power cable (and extension cords) for any signs of wear or damage. Replace if necessary Connect the power supply
and check that the green light
“POWER” (pos.26;fig.1.1) has turned on. If turned on, the machine is ready for operation.
Next, pull the emergency stop (pos.27;fig.1.1) and push the RUN button (pos.25;fig.1.1)
STOPPING THE MACHINE:
Push the STOP button (pos.24;fig.1.1).
Attention
Use the Emergency button (pos.27;fig.1.1) only in emergency.
5.1 LOCKING CASTER WHEEL
There are two caster wheels located on the front of the dust collector, one of the
wheels may be locked. Locking the wheel will prevent the vacuum from moving,
and possibly causing damage or injury. The wheel should be locked on uneven
surfaces to prevent unexpected rolling or movement. To lock or unlock the caster
wheel, follow the procedure shown below.
• To lock the caster wheel, press down on the metal tab
• To unlock the caster wheel, press backwards on the metal tab protruding from
the top of the wheel assembly.
Figure 4.1
Figure 4.2
Figure 4.3
Figure 5.1
