![background image](http://html1.mh-extra.com/html/lavina/25-x/25-x_user-manual_3911892016.webp)
Superabrasive
User Manual
Original Language
Lavina® 25-X
9/2018
16
Make sure the four bolts holding the adaptor
(Fig.8.3.12) are reliably tighten. Mount the holder on
the machine using the same socket as mentioned in
8.2 (Fig.8.3.10;Fig.8.3.11). The retaining washer fits
into the central hole C of adaptor and the four bolts
into the thread holes Т (Fig.8.3.12). The holder is
centered on the outside diameter of the adaptor.
Ensure the holder is properly connected to the plate
of the adaptor and then tight evenly the four
bolts.Tightening force of the bolts has to be
22...25N.m(16...18 ft/lbs). Mounting the holder
without retaining washer (Fig.8.3.2) is INADMISSIBLE because the security system preventing the separation of part of the holder
in case of broken buffers and elastic element will not function!
You can change the butterfly of the holder without
dismounting the holder of the machine.
You can change the butterfly of the holder without
dismounting the holder of the machine. Fig.8.3.13 is a
3‐D section view of the holder, showing its parts. The
numbering is the same as in Spare parts.
Figure 8.3.10
Figure 8.3.11
T
C
Figure 8.3.12
Figure 8.3.13
Figure 8.3.5
Figure 8.3.1
Figure 8.3.2
Figure 8.3.7
Figure 8.3.3
Figure 8.3.4
Figure 8.3.8
Figure 8.3.9
Figure 8.3.6