Laversab 6300-M4, User Manual

Page: 61 / 64

54
Command Type Description
L1=n R/W Read/set max. knots limit
L2=n R/W Read/set min. knots limit
L3=n R/W Read/set max mach
L4=n R/W Read/set max. altitude
L5=n R/W Read/set min. altitude
L6=n R/W Read/set max. altitude rate
KR=n R/W Read/set knots rate
PF=n R/W Read/set current profile point
GO W Command to execute current settings.
CN W Command to cancel current settings
IE=n R/W Read/set IEEE address
C1=n R/W Read/set Pt vacuum calibration point
C2=n R/W Read/set Pt fullscale calibration point
C3=n R/W Read/set Ps vacuum cal. point
C4=n R/W Read/set Ps fullscale calibration point
CC W Activate new calibration points after new values have
is executed.
SF=0 R Read the status of the Self Test last performed.
SF=1 W Start the Self Test.
SG W Set 'Ground'
GG W Go To 'Ground'