manualshive.com logo in svg

LAVAZZA LB 1000 BLUE FAMILY, Maintenance Manual, Page: 4 / 54

Share
Download
LAVAZZA LB 1000 BLUE FAMILY Maintenance Manual Download Page 4

This manual contains information, safety instructions, spare parts and wiring 
diagrams to carry out the correct maintenance and to solve eventual problems. 
All rights reserved by Lavazza S.p.A. including the rights to reproduce the text 
and images of this document or part of it.   

The continuous development and improvement of the machine may have 
caused modifications that are not included in this manual. Read it carefully and 
keep it at hand for reference.

Before leaving the factory this specific machine's model has been submitted to 
a strict control in order to guarantee reliability; therefore you should verify that 
during transportation the dispenser has not incurred structural damages that 
could compromise its operation and safety.   

Some items illustrated in the figures of this manual could be different of those 
on the machine; some components may be omitted to obtain illustrations.     

Keep this manual in an accessible place near maintenance staff.   

Preface

2

“LB 1000 Blue Family”

 

Rel. 00  settembre 2004

“LB 1000 BLUE FAMILY” C

OD

. 83346 / R

EL

. 1.00 / S

EPTEMBER 

2004

“

 

 

1

2

/

6

General information

Summary of Contents for LB 1000 BLUE FAMILY























































Reviews:

No comments