14
FLUSHING THE BREWER
On first set up of the brewer or if the hot tanks have been drained
and the machine needs to be re-primed, water will need to be flushed
through internal workings. After switching on the brewer at install,
please refer to the on-screen instructions in order to do a flush. You can
also perform a flush at any point from the Operator menu. Consider
flushing the brewer if it has been switched off for 5 days or more.
The basic steps of flushing the brewer are as follows:
Remove the drip tray.
Partly slide out the Freshpack
bin far enough to capture the
water, which will be dispensed as
illustrated.
Follow the on-screen instructions
in order to complete the flush.
After the flush, empty any water
from the Freshpack bin, clean the
bin, fully install it back into the
brewer and replace the drip tray.
The brewer will then require 2
minutes to heat the water before
it can produce its first hot drink.
Please note that the volume of
the first 5 drinks may be variable
as the brewer calibrates itself.
1
2
3
4
5
