“E
SPRESSO
P
OINT MOD
. M
ATINÈE
” 120 V
C
OD
. 83312 / R
EL
. 1.00 / F
EBRUARY
2003
4
4/7
In the event of faults
When inserting the pod
everything runs correctly.
The coffee is cold.
• The ceramic cup is too cold.
• The 100 °C thermostat is
damaged.
1
Place the cup in a heated
place before use.
2
Place the cups on the
machine for a little while
before using.
1
Replace the thermostat.
When inserting the pod under
normal conditions of
operation of the indicator and
with the light of the cup
compartment on, the pump
runs few seconds, then it
seems to stop working.
The beverage is not obtained.
• The unit is clogged by
scale.
1
Open the hydraulic circuit
dismantling the output
unit.Clean the labyrinth,
chamber and the clogged
pipes.
2
Replace any parts that
cannot be cleaned.
3
Always replace the seals.
When inserting the pods with
the indicator lights working
normally and with the cup
compartment light on, on
selecting the required dose
water comes out of the steam
jet outlet.
• The two-way solenoid valve
mounted on the heating unit
does not function correctly.
1
Dismantle the solenoid valve
and ensure that there are
no fragments or grains that
may obstruct the correct
movement of the piston.
2
Should the defect persist,
replace the solenoid valve.
• The electronic card does not
function correctly.
1
Replace the electronic card.
