LAVAZZA CLASSY MINI, Instructions Manual, Page: 15 / 48

15
EN
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
• Power supply: 120V / 60Hz
• Nominal power: 1250 W
• Water tank capacity: 0,7 L (23,66 oz) - Removable type
• Weight: 3,5 kg (7,7 lb)
• Materials used for the body: thermoplastic
• Size: Height 26 cm - Width 13,5 cm - Depth 34 cm
Height 10,2 in - Width 5,3 in - Depth 13,3 in
• Thermo fuses
N° Problem encountered Possible causes Solution Result
11 The coffee is cold.
1 - Coffee pours out in drops,
water circuit clogged.
Run the machine washing cycle.
OK: call solved.
Non-OK: go to step 2
2 - The machine has lime
scale build-up.
De-scale the machine.
OK: call solved.
Non-OK: machine being serviced
12 Dispensed coffee is insufficient
or excessive.
1 - Coffee pours out in drops,
water circuit clogged.
Run the machine washing cycle.
OK: call solved.
Non-OK: go to step 2
2 - The machine has lime
scale build-up.
De-scale the machine.
OK: call solved.
Non-OK: machine being serviced
13
Coffee not supplied and steam
coming out of the capsule
compartment.
1 - The loading lever was
not set to the brewing
position.
Set the loading lever to the
brewing position.
OK: call solved.
Non-OK: machine being serviced
14 Coffee pours out in drops.
1 - Faulty capsule. Replace the capsule.
OK: call solved.
Non-OK: go to step 2
2 - Pump working improperly. Check for abnormal noise of the
machine.
OK: call solved.
Non-OK: go to step 3
3 - Spout/water circuit
clogged.
Clean the coffee dispensing
spout
(see MAINTENANCE AND
CLEANING).
OK: call solved.
Non-OK: go to step 4
4 - The machine has
limescale build-up.
De-scale the machine.
OK: call solved.
Non-OK: machine being serviced.
15
One of the two buttons is not
working and the relevant LED
is off.
1 - Mechanical blocking.
Try to power the machine off by
disconnecting the power plug
for 10 seconds then reconnect
it. Power the machine on and
check the correct operation of
both buttons.
OK: call solved.
Non-OK: machine being serviced
If the problem persists, the
machine can continue to be
used with the other button; in
this case, the button working
regularly will no longer have the
automatic dosing but will be free
dosing, and the user will decide
when stopping the dose.
As regards the faults not covered by the above table, or if the suggested actions do not remedy the faults,
contact the nearest Lavazza Authorized Service Centre.