LAVAMAT 74950A3, User Manual

Page: 36 / 40

Push the drain hose onto the spigot and
secure with a clip, ensure a loop is
formed in the drain hose (see diagram)
to prevent waste from the sink entering
the appliance.
If you intend to drain the hose from the ma -
chine into a sink, make sure that the sink is
empty and the plug hole is not blocked.
Use the plastic “U - Piece” supplied.
Before connecting up the machine to new pi
-
pework or to pipework that has not been used for some time, run off a reasonable
amount of water to flush out any debris that may have collected in the pipes.
In the interest of the environment
The appliance should be connected to the FOUL
drainage system, the water will then be taken to
a sewage works for treatment before being dis -
charged safely into a river.
It is essential that these appliances are not con -
nected to the surface water drainage system as
this water is discharged directly into a river or
stream and may cause pollution.
If you require any further advice please contact
your local water authority.
ELECTRICAL CONNECTION
Information on the electrical connection is given on the rating plate on the inner edge of
the appliance door.
Check that your domestic electrical installation can take the maximum load required, al -
so taking into account any other appliances in use.
WARNING!
Connect the machine to an earthed socket.
WARNING!
The appliance is supplied with a 13amp plug fitted. In the event of having to change the
fuse in the plug supplied, a 13amp ASTA approved (BS1363/A) fuse must be used.
loop
36 Electrical connection