Installation
Part No. 70476501ENR7
27
NOTE: Shaded areas indicate adjacent structure.
1 0.5 in. (13 mm) recommended between machines for removal or installation
2 Allow 2-4 in. (51-102 mm) opening at top of machine to aid in removal or installation. A removable trim piece may be used to
conceal the opening; zero clearance allowed for trim.
3 4 in. (102 mm) maximum header thickness
4 Minimum clearance permitted for remainder:
120 Gas/Electric
4 in. (101.6 mm)
120 Steam
6 in. (152.4 mm)
170/200 Gas
4 in. (101.6 mm)
170/200 Steam
8 in. (203.2 mm)
5 Guard
6 Provision for make-up air
7 24 in. (610 mm) minimum, 36 in. (914 mm) recommended for maintenance purposes
8 0.25 in. (6 mm) recommended for removal or installation purposes, zero clearance allowed
Figure 2
Position and Level the Tumble Dryer
The tumble dryer may be moved with or without the skid. To
remove the skid, unscrew the four shipping bolts, and discard
them.
To fit a 170 and 200 series tumble dryer (with shipping skid)
through a 8 foot (2.43 meters) high door, you must remove
the front access panel. The upper 3 inches (76 mm) of the
stove must also be removed on 170 series gas tumble dryers.
Removing the entire gas or steam heater assembly and the
shipping skid, will reduce the height of the 120 series tumble
dryer to 70 inches (1,778 mm), and the 170 and 200 series
tumble dryer to 75 inches (1,905 mm).
Summary of Contents for LDR-900-S
Page 2: ......
