LAVA Computer MFG Inc. eSynC Product Family - Reference Manual – C03
2 Vulcan St. Toronto, ON
Tel: +1 416 674-5942
www.lavalink.com
Canada, M9W 1L2
Toll Free (US & Canada): 800 241-5282
9 of 36
btty-cycle-limit=50
The “product-family=2” is always used for eSynC products.
The “btty-protection-type” keyword selects between two possible battery protection schemes, to
adapt to the capabilities of the mobile device. The “LTM Configuration Help” will identify
which option to use for a given mobile device.
The above sample sets the upper and lower battery charge thresholds at 75% and 45%
respectively. Every 50 charge cycles the battery is allowed to charge to 100%. Within a few
minutes of reaching the 100% level, the device starts discharging down to the 45% level.
Periodically charging to 100% permits recalibration of the battery level to battery voltage by the
device.
The "btty-cycle-limit-on-start=2" results in the device being allowed to charge up to 100% two
cycles after the LTM application is started. The "btty-cycle-limit-on-start" command allows for
an early battery calibration for situations where the device might have been turned off for some
time. Using "btty-cycle-limit-on-start" is optional.
Only the “btty-protection-type=1” option can be used with eSynC Mk1 products. Using “btty-
protection-type=2” with an eSynC Mk1 results in the battery charging to 100%.
Use of “btty-protection-type=1” and “btty-protection-type=2” is supported by eSynC Mk2
products.
The eSync Mk1 and Mk2 can be identified by the LED startup sequence, the Hardware
Information section of LTM, or through the optional LAVA Device Info utility.
Note: The LAVA-Device-Info utility and is a useful addition for LTM 3 users. However, it is
redundant for users of LTM v4.** and v5.** as its features are now built into the app.
