Lava Heat Lava 2G, Instruction Manual

Page: 10 / 22

9
ASSEMBLY INSTRUCTIONS
Hardware Used
7
7. Lean the heater carefully. Install 3pcs
studs (CC) on the top plate,secure them with
3pcs M8 cap nuts (II). Assemble the mesh
base to the stud,secure them with 3pcs
M8 nuts (HH). Secure the mesh to the mesh
base with 3pcs Screw M5X12(DD).
CC
II
DD
HH
CC
x 3
x 3
Nut M8
Stud
II
x 3
Cap nut M8
HH
DD
x 3
Screw M5 X 12
8
8
.
Use a secured step ladder or lean the
heater carefully and attach the 3pcs small
flat washerĭ8 (BB) on top of the heater.
Place a washer on each reflector stud,
then install the reflector hood, and lastly
fasten the reflector with another washer
and wing nut (AA). Return the heater
gently to upright position, if applicable.
Hardware Used
AA
BB
x 3
x 6
Small flat
washer ĭ8
Wing nut