9
EN
TROUBLESHOOTING GUIDE
Symptom
Possible Cause
Solution
Noise or sound
distorted on AM or FM
broadcast
- Station not tuned properly for AM or
FM.
- FM: FM telescopic antenna is not
extended.
- AM: The bar antenna is not positioned
correctly
- Retune the AM or FM broadcast
station.
- FM: Extend FM telescopic antenna.
- AM: Reposition the unit until the
best reception is obtained.
AM or FM no sound
- Unit not in
“AM” or “FM” function
mode.
- Volume set at minimum
- Slide FUNCTION SWITCH to
“AM” or
“FM” position.
- Increase Volume.
CD player will not play
- Unit not in CD function mode.
- AUX IN jack is plugged
- CD is not loaded properly.
- If the CD is self-compiled, the media
used may not be compatible with the
player.
- Exhausted battery
- Select CD function mode.
- Unplug cable plugged in AUX IN jack.
- Load CD with label side up.
- Use better quality blank media and
retest.
- Replace all old batteries.
CD skips while playing
- Disc is dirty or scratched.
- Wipe CD with clean cloth or use
another disc.
Intermittent sound from
CD player
- Dirty or defective disc
- Dirty pick up lens
- Player is subject to excessive shock
or vibration
- Clean or replace the defective disc.
- Use a CD lens cleaning disc to
clean the lens.
- Relocate the player away from
shock or vibration.
Sound appears
distorted at
high volume
setting
- Volume control is set to maximum.
- Batteries become low
- Adjust Volume Control to a lower
comfortable level.
- Replace all the old batteries with
new ones.