EN - 13
4. USE OF PRODUCT
4.1
Control of hob
The hob is controlled by the pressing the
appropriate electronic button. Each button
press is followed by a buzzer sound.
1
7
8
9 10
11 12 13 14
2
3
4
5
6
1-
Heater display
2-
Activate/Deactivate heater
3-
Timer display
4-
Timer function cooking zone indicators
5-
Dual zone indicator
6-
Triple zone indicator
7-
Dual/triple zone selection
8-
Heat setting/timer decrease
9-
Activate/Deactive timer
10-
Heat setting/timer increase
11-
Decimal point
12-
Key lock indicator
13-
Key lock
14-
On/Off
Mode Descriptions
Stand-By-
Mode
S-Mode
Mains supply is applied
to the hob control and all
heater displays are off or
a residual heat display is
active.
Operating-
Mode
B-Mode
At least one heater display
shows a heat setting
between ´
0
` and ´
9
`.
Lock Mode
VR-
Mode
The hob control is locked.
Turn on and Turn off the Appliance
If the appliance is in Stand-By mode, it is
put in Operating mode by pressing the On/
Off button for at least 1 second. A buzzer
sound indicates the successful operation .
On all heaters a “
0
” will appear and all
decimal points of the heaters will flash (1
sec on, 1 sec off).
If there is no operation within 10 sec, the
display of all heaters will turn off.
If the displays are turned off, the heater will
be sent into Stand-By mode.
If
is pressed for more than 2 seconds (in
Operating mode), the appliance is switched
off and is sent into S-Mode again. The
appliance can be turned off by pressing
at any time; even if other buttons are
pressed simultaneously.
If there is any residual heat from a heater,
this will be indicated in the corresponding
Heater Display.
Select Heater
If a single heater is chosen with the
corresponding Activate/Deactivate Heater
Button the decimal point of the Heater
Display flashes. For the selected heater,
you can set the heat level between 1-9 by
pressing the Heat Setting Buttons
or
.
The buttons must be pressed within 3
seconds, otherwise the heater selection is
erased and heat setting dot will disappear
(decimal point). If there is no further
operation within 10 seconds, the heater
reverts back to S-Mode.
The heat setting can always be changed by
pressing or
. The available settings
are between 1-9.
Each button operation or each display
change is accompanied by a buzzer sound.
Turn on Dual and Triple Zones
Turn on the dual zone
The activation of the dual zone is carried
out after selecting the desired heater by
pressing
. This is confirmed by a buzzer
sound. At the same time, the corresponding
Dual Zone Indicator illuminates. Touching
for a second time, toggles the status of the
dual zone; it changes from dual zone on to
dual zone off and back again.
The extension zone can only be activated
after a level between 1-9 is set on the basic
zone of the heater.
Turn on triple zone
A dual or triple zone can only be switched
on if the basic zone of a heater is set to
a level beyween 1–9 and the heater is
selected (this is indicated be the dot being
illuminated).
If
is pressed, the signal sounds and the
Dual Zone Indicator is illuminated. If
is
pressed once again, there is another buzzer
and the triple heater is switched on. The
Triple Zone Indicator will be illuminated and
the triple zone will be energized.
Pressing
again will switch off the triple
zone of the heater. Each operation causes
Summary of Contents for LCA78ZKB
Page 120: ...52313358...
