-10-
The
sleep mode
state is a low-power consumption
state where the functional indicator "
:
" does not
blink. It is an optional factory configuration.
When either button is pressed, or during communi-
cation with a reader, the DMC automatically goes
into
Pause
with a backlit display and all display
segments activate for 2 seconds.
Note:
- The first press on any push button only
turns on the backlight for 3 seconds.
(1) The configuration of the set point is available in
autonomous mode only.
(2) Done manually in autonomous mode or
with the use of a reader in satellite mode.
4- S
ta
tes M
o
des
How to configure
in automomous?
See § 4.4
How to switch
between
Pause and Run
modes in
autonomous?
§ 4.1