- 22 -
• Place the drip tray underneath and unscrew the drain
cap (
G
).
• Remove the small white lid and place the large white
lid (= funnel) on the boiler inlet (
H
).
• Remove the water fi lter and fi ll the reservoir to MAX
with HOT water from the tap.
• Attach the reservoir and allow the water to fl ow
through.
• Remove the water reservoir, the large white lid and
the drip tray and refi t the two caps.
• Fill the cold water reservoir using the fi lter and refi t.
Maintenance
Danger: Switch off appliance. Remove
plug from mains. Warning: Never use
decalcifi er or other chemical products.
To extend the service life of the appliance, use AQUA
fi lter granules. Available in specialised shops or from
www.laurastar.com (
I
).
• The granules must be changed once
they become COMPLETELY brown (
J
).
• Clean the cold water reservoir.
Clean by hand or in the dishwasher.
• Clean the soleplate. To clean, use a POLYFER
abrasive mat (available from your LAURASTAR dealer
or from www.laurastar.com) cloth in accordance with
the instruction manual. Clean soleplate more often
when using starch (
K
).
• Clean the outside of the appliance. Clean using a soft,
damp cloth. Do not use oil or petrol. Slight discolouring
and warping of the plastic possible due to normal wear
of the iron (
L
).
Stubborn stains can be removed using a pan scrub.
I
J
K
L
EN
