Launch X-712, User Manual

Page: 4 / 37

LAUNCH X-712 Wheel Aligner
iii
The machine safety, however, can only be implemented
during the operation, if all of the required steps have
been taken. The operator of the machine has the
obligation to plan these actions and check their
compliance.
The operator must specifically verify that:
z The machine is only used according to
specifications.
z
The machine is only operated in perfect
operational condition and that the safety
equipment is routinely inspected as to their
operational condition.
z
The necessary personal safety equipment for
operating, maintenance and repair personnel is
available and being worn.
z
The operating instructions are always in a legible
condition and are completely available at the
machine location.
z The machine is only operated, maintained and
repaired by qualified and authorized personnel.
z The related personnel is instructed routinely in all
pertaining questions of work safety and
environmental protection, and knows the operating
instructions, especially the safety instructions
contained therein.
z
All safety and warning labels attached to the
machine are not removed and are legible.
Concrete safety
instructions and applied
symbols
Concrete safety instructions are provided in the following
operating instructions which will point out any
unavoidable remaining risks during the machine
operation. These remaining risks contain hazards for:
Persons
Product and machine
The environment
Symbols used in the operating instructions should draw
attention to the safety signs!
This symbol points out that specifically
personal injury risks may be anticipated (Mortal
danger, risk of injuries).
This symbol signifies that especially hazards
for the machine, material and the environment may
be encountered.
The most important objective of the safety signs exists in
the prevention of personal injuries.
If the warning triangle with the wording “danger” is on a
safety notice, hazards for the machine, material and the
environment are not excluded.
If the warning triangle with the wording “caution” is on a
safety reference, personal injuries are not anticipated.
The applied symbol cannot replace the text of the safety
reference. The text must therefore always be completely
read!
Basic safety measures during normal
operations:
The machine may only be operated by trained and
authorized personnel who know the operating
instructions and are capable of working with them!
Prior to switching the machine on, check and verify that:
Only authorized personnel are located within the
working range of the machine.
No one can be injured when the machine is activated!
Check the machine for visible damages prior to use and
verify that it is only operated in perfect condition! Report
any problems immediately to the supervisor!
Prior to each operating start, check and verify that all
safety equipment operates perfectly!
Basic safety measures during service
and maintenance:
Adhere to the inspection and maintenance intervals
specified in the operating instructions!
Block access to the work area of the machine to
unauthorized personnel prior to performing maintenance
or repairs! Attach or set up a warning sign that points out
maintenance or repair work!
Pull the power plug prior to any maintenance or
repair work or switch off the main switch for the power
supply and secure with a lock, if the power supply is
installed.
The key to this lock must be in the hands of the person
that is completing the maintenance or repair work! Only
use perfect load suspension and lifting equipment when
replacing heavy machine parts!
Properly dispose of environmentally