LAUNCH
X-431 PAD V ELITE
User Manual
40
6.19 Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
6.20 Language Change
This function is used to change the system language of the vehicle central control panel.
6.21 A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
6.22 Coolant Bleed
Use this function to activate the electronic water pump before venting the cooling system.
6.23 Transport Mode
To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the
network for door open and disable remote key etc. In this case, deactivating transport mode is needed to recover
vehicle being normal.
6.24 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
6.25 NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. If the NOx fault is
re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value
stored in the engine ECU.
6.26 Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU (provided
that the vehicle has a hidden function and supported by hardware).
