LAUNCH
X-431 PAD V ELITE
User Manual
25
Tap
to end recording and save it. The saved file follows the naming rule: It begins with vehicle type, and then the
product S/N and ends with record starting time (To differentiate between files, please configure the accurate system
time).
All diagnostic records can be replayed from
User Info -> My Report -> Recorded Data
.
Save Sample
: This item enables you to customize the standard range of live data stream items and save it as DS
sample file. Each time you run the data stream items, you can call out the corresponding sample data to overwrite the
current standard range.
Tap it to start recording the sample data
(
Note: Only data stream items with measurement units will be recorded
)
, the
following screen will appear:
Once the recording process is complete, tap
to stop it and navigate to the data revision screen.
Tap the Min./Max. value to change it. After modifying all desired items, tap
Save
to save it as a sample DS file. All DS
files are stored in
User Info -> Data Stream Sample
.
E. Actuation Test
This option is used to access vehicle-specific subsystem and component tests. Available test vary by vehicle
manufacturer, year, and model.
During the actuation test, the display tablet outputs commands to the ECU in order to drive the actuators, and then
determines the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators,
such as switching a injector between two operating states.
On the diagnostic function selection screen, tap
Actuation Test
, the system will display as follows:
