LAUNCH
X-431 EURO TAB II User Manual
33
• If you have scanned the VIN of the vehicle, tap
to choose it from
the record list.
• In case the handset failed to detect it, tap
to enter it manually.
• To turn the flash on, tap
.
After scanning, the screen automatically displays the result.
Fig. 5-6
• If the VIN scanned is incorrect, tap the result field to modify it and then
tap
“OK”. If the VIN exists on the remote server, the system will enter
the vehicle information screen. See Fig. 5-2.
• To scan it again, tap “REPEAT”.
2)
Input the VIN, and tap
“OK”, the system will automatically identify the
vehicle model and directly navigate to the vehicle information page.
In general, vehicle identification numbers are standardized - all contain 17
characters. VIN characters may be capital letters A through Z and numbers
1 through 0; however, the letters I, O and Q are never used in order to avoid
mistakes of misreading. No signs or spaces are allowed in the VIN.
Tap
“SKIP” to go to Diagnostics main menu screen.
5.2 Local Diagnosis
Tap
“Local Diagnose” to enter the vehicle selection page.
