LAUNCH X-431 ADAS PRO Calibration Tool User Manual
47
5.2.2 Calibrating the rear & AVM camera
No calibration tool is required for the calibration of the rear camera. User just needs to
choose the corresponding calibration pattern, and follow the on-screen instructions on
the diagnostic tool to place the calibration pattern to the desired position in rear of the
vehicle.
5.3 Calibrating Radar-based ADAS
X-431 ADAS PRO calibration system provides a Radar expansion kit for the calibration
of the radar-based Advanced Driver Assist Systems (ADAS). Compatible with the
systems used by VAG and on certain ADAS-equipped Mercedes-Benz models, it
extends the capability of the X-431 ADAS PRO calibration tool beyond just
camera-based systems.
Before proceeding this step, please make sure the following conditions must be met:
Place the X-431 ADAS PRO calibration panel in front of the vehicle.
Ensure the vehicle is stopped on even surface.
Level gauge bubble of radar reflector is centred.
Prepare the radar kit.
Fig. 5-10 (Magnetic laser)
Fig. 5-11 (Radar reflector)
Summary of Contents for X-431 ADAS PRO
Page 4: ......