![background image](http://html1.mh-extra.com/html/launch/x-431-adas-pro/x-431-adas-pro_user-manual_3875622014.webp)
X-431 ADAS PRO Calibration Tool User Manual
10
3.2 Base Support
Fig. 3-2
No.
Description
1
Upper cover
It should be removed before installing the beam lifter. It is divided into
two parts. The part installed with the name plate should be installed on
the other part.
2
Adjustment screws
Use the adjustment screws to balance the base support.
3
Rolling caster
Allows you to move the tool from one place to another place.
4
Fixing baffle
For securing the upper cover.
5
Mouting hole
For securing the beam lifter.
Summary of Contents for X-431 ADAS PRO
Page 4: ......