background image

 

NOTE: 

 

Carefully read the user manual before using, and keep it well for future reference. 

 

Carefully check the device parts list before using.For any doubt, contact Launch distributor 

immediately. 

 

Due to the product upgrade, tiny difference between the user manual and the device will not be 

further noticed. Take the device as standard. 

 

 

Copyright reserved! Without written agreement from Launch Tech Co., Ltd (Hereinafter refer to "Launch"), 

any company or person is not allowed to copy and duplicate this user manual in any format (electronic, 

mechanical, video, record or other formats).The user manual is designed only for Launch products. Any 

consequence  caused  by  using  the  user  manual  to  guide  other  device  operation  is  not  under  the 

responsibility of Launch. 
 
Launch and its branches are not responsible for the fees and expense of the device damage and loss due 

to private accident or from third party, misuse and abuse of the device, unauthorized change and repair, 

or any operation and maintenance not following Launch standard.   
 
Launch  is  not  responsible  for  device  damage  or  problem  due  to  the  usage  of  any  optional  parts  or 

consumables instead of Launch original products or Launch recognized products.   
 
Declaration: Other product names mentioned in the user manual are aimed to describe the device usage. 

The registered trademarks still belong to the original company.   
 
The device is for professional technicians or maintenance and repair personnel. 
 

Registered Trademark 

 

Launch has registered its trademark in China and several other countries, logo is 

.Other Launch 

trademarks, service marks, dot names, Icons, company names mentioned in the user manual all belong 

to Launch and its subsidiaries.In those countries where Launch trademark, service mark, dot name, icon, 

company name not registered yet, Launch declaim the right for its unregistered trademark, service mark, 

dot name, icon, and company name.Trademarks of the other products and company names mentioned in 

the user manual still belong to original registered company.Without written agreement from the owner, no 

person is allowed to use the trademark, service mark, dot name, icon and company name of Launch or of 

other mentioned companies.You can visit http://www.cnlaunch.com or write to Customer Service Center 

of LAUNCH TECH CO., LTD at Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Longgang 

District, Shenzhen, P.R.China, to get contact with Launch for the written agreement on the usage of the 

User Manual.   

 

 
 
 
 

Summary of Contents for VALUE-500





























Reviews: