LAUNCH
TLT830WA INSTALLATION MANUAL
11
5.6 Hydraulic Hose Connection
Hydraulic Hoses Connection
TLT830WA hydraulic hoses connection is
illustrated in Fig. 10. First connect the big scissor
main cylinder hose NO1 to stop valve Z1 and
tighten the fitting. Open stop valve Z1 and close all
other stop valves.
Press the big scissor UP button to test the power
equipment: if the motor doesn’t work, with the
abnormal noise, or the motor is running but the
platform doesn’t rise, or heating, stop the machine
immediately and check the wire connection.
Press the big scissor UP button to raise the big
scissors master platform to 1.5m
（
59″
）
high.
Press SAFETY LOCK to engage the safety
ratchet.
Connect other oil hoses according to the Fig.10,
and tighten all fittings to prevent the oil leaking.
Open the big scissor slave cylinder stop valve (F1),
and close other stop valves. Press the big scissors
UP button to raise the platform of the slave
platform to 1.5m
（
59″
）
high. Press SAFETY
LOCK to engage the safety ratchet. The two
platforms must be locked on position of ratchet for
fine final level adjustment later. Change two stop
valves (Z1,F1) back to normal states.
The oil hoses below the platforms should be fixed
properly to prevent the damage by the machine
during the lowering down.
Power Unit
NO1(Z1)
NO2(F1)
NO3(Z2)
NO4(F2)
Small Scissor
Stop Valve
Big Scissor
Stop Valve
Small Scissor
Master Cylinder
Small Scissor
Slave Cylinder
T Fitting
T Fitting
Big Scissor
Master Cylinder
Big Scissor
Slave Cylinder
Fitting
Fitting
Fitting
Oil Return Hose
Fig.10
