Operation panel is as follows:
1
.
2
Right / Left
Up / Down
Switch
Monitor
Over Charge Protection
Over Heat Protection
Low Voltage Protection
Short Circuit Protection
Revert Polarity Protection
.
3
.
4
.
5
.
6
.
7
.
8
.
9
.
Over heat protection: It will automatically stop charging when the machine is over heat.
The internal fan works.
Low Voltage Protection: When the input voltage is lower than required, the machine will not
work.
Short circuit protection: Battery is damaged. The machine will not work when Internal part short
circuit.
Revert Polarity Protection: The LCD displays when the battery clip is reversed.
ON/OFF: If the charging clamp is in bad contact, press the key to enter the forced start mode.
Use left and right keys to switch options, up and down keys to the previous step and the next step.
Press the start stop button to start and halt.
Overcharge
protection:
In the charging process, the machine will constantly detect the
battery state to prevent damage from overcharging.
When adjust the programming voltage, you need to select the adjustable mode, then press right
and down buttons at the same time, after you hear the warning tone, you can use the up and down
keys to set voltage. After setting, press the right and down keys again to logout, then press ON
to start.
1
2
3
4
9
8
7
6
5
English switching:
RLEFTKEY!
AA-Equipment Support
1e Tussendijk 17, 5705 CG Helmond (NL)
+31 (0) 492 525 717
