LAUNCH
45
Note:
In case the diagnostic codes are manufacturer-specific, users need to
select the manufacturer manually and the following prompt message will appear
on the screen.
Figure 6-6
Press
OK
to enter to select the manufacturer. Figure 6-7 will be shown on the
screen.
Figure 6-7
Press
/
to select different manufacturer; press the
/
button to turn to
next or previous page. After selecting the desired one, press
OK
to confirm.
• If some DTCs are found, the screen will display the DTCs (Refer to Figure 6-5).
• If the DTC can not be found, a screen similar to the following figure will appear: