LAUNCH
CReader 5001/6001 English User’s Manual
12
This option retrieves and displays live data and parameters from the vehicle’s ECU.
5. View Freeze Frame
When an emission-related fault occurs, certain vehicle conditions are recorded by the
on-board computer. This information is referred to as freeze frame data. Freeze Data is a
snapshot of the operating conditions at the time of an emission-related fault.
Note: if DTCs were erased, Freeze Data may not be stored in vehicle memory depending on vehicle.
6. O2 Sensor Test
This option allows retrieval and viewing of O2 sensor test results for most recently
performed tests from the vehicle’s on-board computer.
7. On-board Monitoring
This function can be utilized to read the results of on-board diagnostic monitoring tests for
specific components/systems.
8. EVAP System
The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before
using the system test function, refer to the vehicle’s service repair manual to determine the
procedures necessary to stop the test.
9. Vehicle Information
The option displays the Vehicle Identification Number (VIN), the Calibration Verification
Number (CVN), and other information of the test vehicle.
5.2 Review (Only for CR6001)
The option is used to review or delete the recorded DTC, Data Streams, and Freeze Frame.
For details on how to record, please refer to Chapter 4.2 Settings.
On the main menu, highlight “Review” and press [OK] to enter the following screen:
Figure 5-4
Select the desired option and press [OK] to perform the corresponding function.
Summary of Contents for Creader 5001
Page 1: ...V1 00 000 2017 09 27...