LAUNCH TECH X-431 PRO3 SE User Manual Download Page 74

Page: 74 / 83

LAUNCH

X-431 PRO3 SE User Manual

• Tap the user image to change it.

• Tap > next to

Upgrade Period

to check the due date of all diagnostic

software.

9.10 Change password

This item allows you to modify your login password.

9.11 Settings

It enables you to make some application settings and view software version
information etc.

9.11.1 Units

It is designed to configure the measurement unit. Metric System and English
System are available.

9.11.2 Shop Information

This option lets you define your shop information. It mainly includes Workshop,
Address, Telephone, Fax and License Plate.

After inputting, tap

Save

Once you saved the shop information, it will be entered automatically in the

Add

Information

box every time you save the diagnostic report.

Summary of Contents for X-431 PRO3 SE




















































































Search results

Summary of Contents for X-431 PRO3 SE

Reviews:

Related manuals for X-431 PRO3 SE

Brands by name

Popular brands

LAUNCH TECH X-431 PRO3 SE, User Manual

Search results

Summary of Contents for X-431 PRO3 SE

Reviews:

Related manuals for X-431 PRO3 SE

Brands by name

Popular brands