background image

X-431 Throttle User Manual

 

ii 

Important Safety Precautions 

Important:

 To avoid personal injury, property damage, or accidental damage to 

the product, read all of the information in this section before using the product. 

y

  Never collide, throw, or puncture X-431 Throttle, and avoid falling, extruding 

and bending it. 

y

  Do not insert foreign objects into or place heavy objects on your device. 

Sensitive components inside might cause damage. 

y

  Do not use X-431 Throttle in exceptionally cold or hot, dusty, damp or dry 

environments. 

y

  In places using X-431 Throttle may cause interference or generate a potential 

risk, please turn it off. 

y

  X-431 Throttle is a sealed unit. There are no end-user serviceable parts 

inside. All internal repairs must be done by an authorized repair facility or 
qualified technician. If there is any inquiry, please contact the dealer. 

y

  Never place  X-431 Throttle into apparatus with strong electromagnetic field. 

y

  Keep X-431 Throttle far away from magnetic devices because its radiations 

can damage the screen and erase the data stored on X-431 Throttle. 

y

  DANGER: Do not attempt to replace the internal rechargeable lithium battery. 

Contact the dealer for factory replacement.   

y

  CAUTION: Please use the included battery and charger. Risk of explosion if 

the battery is replaced with an incorrect type. 

y

  Do not disconnect power abruptly when X-431 Throttle is being formatted or 

in process of uploading or downloading. Or else it may result in program 
error. 

y

  Do not delete unknown files or change the name of files or directories that 

were not created by you, otherwise your X-431 Throttle software might fail to 
work. 

y

  Be aware that accessing network resources can leave your X-431 Throttle 

vulnerable to computer viruses, hackers, spyware, and other malicious 
activities that might damage your device, software or data. It is your 
responsibility to ensure that you have adequate protection in the forms of 
firewalls, antivirus software, and anti-spyware software and keep such 
software up to date. 

Summary of Contents for X-431 EURO TAB



































































































































Reviews: