- 28 -
In piece counter mode you can:
-
set weight to zero for small variations (press
and confirm with ENTER);
-
set semi-automatic tare (press TARE);
-
do a new sampling (press START for 3 seconds,
appears, press ENTER, set number of
pieces on scale and confirm with ENTER);
To exit piece counter mode and return to standard operations, press START for 3
seconds,
appears; press ESC, select the
operating mode and confirm with
ENTER.
If no setpoint is enabled,you can do a new sampling or return to standard operations also
by pressing MENU.
ENABLING SETPOINT
Setpoint can be used to stop automatic loading of pieces on the weighing system; do the following to
enable them:
-
(default)
:
setpoint disabled;
-
:
setpoint enabled;
Setpoint 1 and 2 switch based on number of pieces while the others always switch on
weight.
After enabling the setpoint, key operations to access menus vary as follows:
-
Press MENU to access setpoint settings;
-
Press START for 3 seconds for new sampling or to change operating mode.
0
+
