The surface gathers hardly any dirt and is easy to
clean and maintain. It is recommended to clean any
kind of dirt as soon as it appears in order to keep
the product in its best condition.
Avoid using scouring agents with grains or solvents,
which may damage the surface of the product.
Do not use strong acidic cleaning agents or vinegar-
based cleaning agents. Please use agents with
a pH value between 3 and 8 to make sure not to harm
the surface. A light solution can be used
on resistant stains or limescale. Before using new
cleaning agents please try them on small areas
of the product first.
Most of the stains caused by everyday use can be
removed using products dedicated for Solid Surface
and Acrylic surfaces, applied with a soft damp cloth
(i.e. cotton or microfibre) or soft paper-towel.
Rust and limescale can be removed by using
a damp cloth with a cleaning agent dedicated
for this kind of stains.
After applying any cleaning product, rinse all areas
thoroughly with warm water in order to remove the
detergent and dry all wet surfaces with soft cotton
or microfibre cloth.
Summary of Contents for SENTEC
