Lauda Proline RP 1290 C, Operating Instructions Manual

Page: 9 / 120

Proline Edition X cooling thermostats
YACE0100 / October 4, 2018
Safety information
9
1 Safety information
1.1 General safety information
A laboratory thermostat heats, cools and circulates liquids according to specified parameters. This
involves hazards due to high or low temperatures, fire and general hazards due to the application of
electrical energy.
The user is largely protected by the application of relevant standards.
Further hazard sources may arise due to the type of tempering medium, e.g. by exceeding or
undercutting certain temperature thresholds or by the breakage of the container and reaction with the
heat transfer liquid.
It is not possible to consider all eventualities. They remain largely subject to the judgment and
responsibility of the operator.
The equipment may only be used as prescribed and as described in these operating instructions. This
includes operation by instructed specialist personnel.
The equipment is not rated for use under medical conditions according to DIN EN 60601-1 or
IEC 601-1.
Classification in accordance with EMC requirements of DIN EN 61326-1
Device Immunity Emissions class Customer power supply
Proline Edition X
cooling thermostat
Type 2 in accordance
with
DIN EN 61326-1
Emissions Class B
in accordance with
CISPR 11
Only for EU
Domestic connection
value ≥ 100 A
Proline Edition X
cooling thermostat
Type 2 in accordance
with
DIN EN 61326-1
Emissions Class B
in accordance with
CISPR 11
the rest of the world
(outside EU)
Unrestricted
Instructions for Class A digital devices, USA:
“This equipment has been tested and found to comply with the limits for Class A digital device, pursuant
to Part 15 of the FCC (Federal Communication Commission) Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own ex
pense.”
“This device complies with Part 15 of the FCC (Federal Communication Commission) Rules. Operation
is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
op
eration.”
Instructions for Class A digital devices, Canada:
“This Class A digital apparatus complies with Canadian ICES-003” (ICES = Interference Causing
Equipment Standards).
« Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada ».