Lauda PROLINE P 5 C, Operating Instructions Manual

Page: 41 / 120

02/2022 Proline heating thermostat 41 / 123
Command T
ext

Provided an external temperature probe is con-
nected, its value is displayed in the lower left part
of the standard and super windows (applies to the
works setting for the window partitioning).

External actual temperatures can also be read in
via interface modules. (

8).
7.7.3 Setting pump power or standby
With the Proline Varioflex pump, 8 pump levels are available with which the bath circulation, flow rate and pressure, the
noise generated and the mechanical heat input can be optimized. This is particularly advantageous with coolers. With
smaller coolers (e.g. P8) without an external load, Power Level 3 to 4 is practicable and sufficient.
Master
Pu
and 1 x

Call pump power levels display
Pu
.

The current pump level is displayed (here
5
).

The pump levels display flashes.
or  Select pump level (pump speed = pump power):
1
to
8
for pump operation. Pump responds immediately!

0
activates the standby function (pump and heater are deactivated).
Wait 4 seconds or

Display flashes 4 s

new value is automatically accepted, or

value is immediately accepted with Enter key.
Pu 5
°C
Pump Menu Screen T
set
T
fix
T
int
°C
25,
01
T
set
°C
25,
00
Level
4
T
ext
°C
25,
02
Pump
3